In this article, we want to tell you why rubies are used inside watches and their movements. To do this, we need to know what rubies are and then be able to investigate why they are used in watch movements.
Usually, rubies used in watch movements can act like ball bearings, ultimately reducing friction. In watches and their activities, because the components of the watch move on top of each other, they may wear out, and this wear can also cause friction, so we use rubies to reduce this friction. Rubies and other precious stones have the ability to eliminate friction.
As you know, watches that have mechanical movement do not need a battery to be able to move, and without a storm, they can move and operate using spring movements. Inside the watches and between their internal parts, like any other device, some gears can be used to drive and operate these gears. Of course, in addition to the gears, bearings are also used in watches and approaches. They rub against each other when moving, and this wear can also increase friction and thus slow down the watch or even damage its performance. To prevent this wear and friction from causing the watch to malfunction, some precious stones and jewelry must be used to eliminate this friction.
When there were no fake watches in the old days, natural rubies were used for hours to reduce and eliminate friction. Still, as time went on and the demand for more watches increased, the reserves of natural rubies were not enough to be used in watches. Reducing the cost of watches Man-made artificial rubies were developed in laboratories that acted like natural rubies and were used to reduce friction.
You may be wondering why we have to eliminate friction and what if conflict does not disappear? To answer this question, we must say that if friction occurs, all the tools used inside the watch will wear on top of each other, which can also lead to performance and lousy watches. Either it affects the watch’s performance and causes it not to work accurately. Due to excessive wear of the tools on top of each other, the mechanisms inside the watch are destroyed, which eventually causes the watch to break down or disappear altogether.
There are alternatives to precious stones, such as rubies. Still, there is a point in this, and that is that in hours with mechanical movement to reduce this friction and wear, some bearings can be used, which also need lubrication and should be Lubricated. It is possible that if we use the directions, the lubrication time will pass, and the watch will no longer be able to function correctly and optimally. To solve the problem that Bearings need lubrication for hours, I use some precious stones such as ruby, which no longer require lubrication and can safely place and use inside the watches to reduce friction.
As we have said, in watches with mechanical movements, there is a problem that the tools inside the watch are destroyed due to activity and wear on each other or cause friction. In this case, we can use some bearings to solve this problem. Some approaches need to be used when lubricating them. In other words, we can say that the directions that are used to reduce friction inside the watch themselves need to be lubricated at certain times. The solution is to use rubies and some precious stones for this problem. In this way, you can also use artificial and natural rubies. Rubies and sapphires can be used. Rubies, whether rubies or sapphires, eliminate the need to lubricate bearings, and to use them, we no longer need to lubricate them. In addition, they can improve the watch’s performance and increase its lifespan. . You may be wondering how to increase the lifespan of hours by using rubies and sapphires, both natural and artificial. The answer is that rubies do not need lubrication and can eliminate the abrasion between tools and parts inside the watch when moving. By removing or reducing this friction, the watch’s performance is improved, and its lifespan is also increased. Another advantage of using rubies for watchmaking is that they are resistant to temperature changes and do not show any reaction. They can be the most suitable option for watchmaking. However, with temperature changes such as a significant increase or decrease in temperature, these rubies used within the hours do not show any reaction and can resist them. Artificial or natural rubies, even rubies or sapphires, are very durable, unlike metal bearings, which react quickly to temperature changes and cannot withstand them. Synthetic rubies are made of chromium oxide and aluminum, making them more economical. However, the value of synthetic rubies is not as high as natural rubies, making synthetic rubies much more economical than sapphires.
Syn rubies are also very effective because if natural rubies are used for all hours with mechanical movements, their cost will increase. Also, the natural reserves of rubies may not be enough to use natural rubies in watchmaking. For this reason, synthetic rubies are used in watchmaking.
It is not easy for watchmakers to place these precious rubies, stones, and jewels inside the watch parts, and watchmakers use microscopes and special tools to identify these rubies in specific places.
Slip jewels from tweezers when placing jewelry and precious stones such as rubies inside watches. It is fun and, of course, time-consuming and requires a lot of effort.
When we say that jewelry is used in watches, usually, these jewels or precious stones can make rubies. These rubies cannot be natural rubies or synthetic rubies. However, synthetic rubies are no different from natural rubies in their performance and effectiveness in reducing friction. The only difference is that natural rubies are made in nature, and synthetic rubies are made in laboratories. We can also say that natural rubies are more expensive than synthetic rubies, and the number of natural rubies is less. Because of the savings and not extravagance and misuse of natural resources of natural rubies, artificial rubies are made in laboratories.
The jewels used in glassmaking are as follows:
Hole Jewels
This type of jewelry is one of the jewels that can be placed on the axis of the gear because it has a hole. Only by placing it on the bezel can they be used in the inside parts of the watch for different types of applications. Usually, this type of jewelry has a hole. They are and are used inside the features of the watch. They have a round shape and a flat and rectangular shape on the bottom. They also have a bearing.
Cap Jewels
This type of jewelry is also without holes and has no holes and can be used to balance. This type of jewelry placed on the watch’s axis and its internal parts can protect the watch when it falls to the ground.
Pallet Jewels
These types of jewelry are usually rectangular and are used at the end of each arm on the pallet fork.
Roller Jewels
Annie is also one of the jewelers of roller jewelry, one of the types of jewels that can be used as a connection point between escape wheels and pallets, which can be used in watches.