In this article, we want to tell you about the Lug width of watches and how we can measure them. In this case, you cannot buy the right size jeans without knowing your waist size. To do this, you must know the size of your waist and then be able to make jeans with the right size for you. The same is true for watches, and you should know the suitable measures before getting the watch the correct size. Regarding the watch and the size of the width of the watch, there is also the fact that they should know its width and, in proportion to its width, they should shorten it to fit your wrist. Of course, if you do not know about these things and do not know how to do the Yankees, do not worry at all. In this article, we want to tell you how to measure them and the width and size of the Lug of watches.
What is a Lug Clock?
The watch lug is where the strap is attached to the watch case. In other words, we can say that the place where the watch strap connects to the watch frame is called Lug.
How can the width of the Lug be measured?
It is better to know that to measure the Lug’s width, and we must be careful so that we can calculate the width of the Lug with high accuracy. In this case, if even one millimeter is wrong in estimating the size and width of the Lug, there may be a problem. Therefore, high accuracy is paramount in measuring the width. It is better to have high accuracy in calculating it, which we will tell you below how to calculate the Lug width of the watch.
To calculate the internal components or the width of the watch, we can use calipers or rulers that are measured and marked in millimeters. We use calipers or rulers with millimeter sizes because measuring the clock is very sensitive, and we must use high-precision instruments to measure it.
– Use a ruler with millimeter sizes to measure the inside of the watch
– To measure the width of the watch strap, we can also use rulers with millimeter sizes or calipers.
How can we measure the clock strap?
To measure the watch strap, it is better to do the following and follow all the steps listed below with high accuracy.
1- We put our precision measuring device or instrument, calipers, or rulers on the watch strap with millimeter sizes.
2- For the watch’s size to be more accurate, it is better to put the watch in place and separate the watch strap, and then I can measure it accurately.
3- Then, it is better to measure the gap that has been created between the lugs and the straps.
4- After doing your measurements, it is better to recheck them. Because the size between the lugs of the watches is basically between 16 and 24 mm, you must check that all your sizes are in principle and correct. For example, we can say that if you bring this size between the gaps to 0.5, it is wrong, and you must do the measurement again.
How can we measure the Band Width of watches?
To measure the bandwidth of the clock, we can do the following. Many straps have a width at the bottom. It’s better to put the watch back on until we know if the information we’re looking for is there or not. If we act in this way, it is called working smarter, not harder. So, before we measure the BandWidth and break the ruler, we can go back to the watch strap to see if our requested information has been hacked there or not. To do this, be sure to turn the clock to see if the information we want is written there or not. If it is not written in this case, we can start to measure the Band Width.
What are watch lugs?
It is better to know that lugs are the same strap or part to which the watch strap is attached, and this strap is also connected to the watch frame. In other words, for a better understanding, we can say that the watch lugs are the interface between the watch strap and the watch frame and can connect them. Lugs are used to attach the watch strap to the watch frame. Of course, it is better to know that sometimes it is possible to refer to watch lugs as watch horns and watch horns.
Now that we understand that lugs are used to attach a watch strap to a watch frame, you may think lugs have only one type and one shape. But lugs have different styles and conditions, which we will mention below.
– Shrouded / Hooded Lugs
These lugs are also rectangular and can also be connected using a horizontal bar.
– Speedy / Bombe Lugs
These types of lugs are also straight lugs with curved edges. Omega Speedmaster made Speedy / Bombe Lugs, which are more popular and in high demand.
– Cushion Lugs
These lugs are also cushion-shaped and are often used for diving watches. In this case, we can say that one of the most common lugs used for diving watches is Cushion Lugs.
– Explorer Lugs
Rolex Explorers are one of the most popular types, which are square and have a broader shape at the top and narrower at the bottom.
– Crab Claw Lugs
As their name suggests, they are shaped like crab claws and have a gap between the watch frame and the watch strap. In other words, we can say that they are in the shape of crab claws and forks and have gaps for connection between the watch frame and the watch strap.
– Teardrop Lugs
This type also has a teardrop shape and is mainly found in old luxury watches such as Patek Philippe and Rolex brands. In other words, it can be said that this type of Lugs was used to connect the strap and watch frame in the old luxury watch brand Patek Philippe and Rolex.
– Straight Lugs
One of the most common lugs is for connecting the straps of watches and frames and is used more. But they may come in various sizes, narrow, large, and trim.
How can we measure the clock strap?
There are methods for measuring the clock strap listed below, and you can examine them and follow the steps below to calculate the belt.
You may want to change your watch strap; in this case, you must know the size of your watch strap before you can change the watch strap later. In this case, without knowing the length of the watch strap, if you want to change it, you may get it. Because the watch strap is the right size for your wrist, if you do not know the exact size and replace it, it is possible to make a watch strap that is not the size of your wrist.
They measure the size of the watch strap on it, but you can calculate the size of the watch strap on some of the measuring tools, such as a ruler, using a measuring tape.
How can the width of the Lug be measured?
You may still wonder what Lug width is and why we should measure it. The Lug is the part that connects the watch strap to the watch frame, and its width is the right and left side, and we must measure them to know how much the watch strap fits in this Lug and is suitable for it. To measure it, if the details of their size are not written on the belt and back of the watch, you can use the measured ruler to calculate the width of the strap and prepare the strap of the watch accordingly.